Sprinkler Maintenance
Schedules for
Haysville and Surrounding Areas

Weather-Based SchedulingActivationMid-Season
Check
Winterize
By
Well SystemsMid-March/
Late March
July/
August
Mid-November
Pressure-Tank SystemsLate-March/
April
July/
August
Late-October/
Early-November
City SystemsLate-March/
April
July/
August
Late-October/
Early-November
Backflow Prevention TestsMarch-
May
Weather-Based SchedulingActivationMid-Season
Check
Winterize
By
Well SystemsMid-March/
Late March
July/
August
Mid-November
Pressure-Tank SystemsLate-March/
April
July/
August
Late-October/
Early-November
City SystemsLate-March/
April
July/
August
Late-October/
Early-November
Backflow Prevention TestsMarch-
May

Call Us If Your System Shows any of these Problems

Head Not Rotating

The sprinkler head stays in one position and doesn’t move like it should. Water only hits one area instead of rotating across the full pattern. This can lead to dry spots in some areas and too much water in others.

Zone Won’t Shut Off

Water continues running even after the system is turned off. One area of the yard stays constantly wet or flooded. This usually points to a stuck valve or electrical issue.

Low Water Pressure

Sprinkler heads don’t pop up fully or spray weakly. Coverage is reduced and water doesn’t reach as far as it should. This can be caused by leaks, clogs, or other zones are open when they shouldn’t be.

Always Wet or Soggy Area

A section of your lawn stays muddy or overly saturated. You may notice pooling water or grass growing faster in that spot. This is often caused by a leak underground or a broken sprinkler head.

High Water Pressure / Misty Spray

Water sprays into a fine mist instead of solid streams. Wind easily carries the mist away, reducing efficiency. This can waste water and lead to uneven coverage.

Broken or Damaged Head

A sprinkler head is cracked, missing, or spraying unevenly. Water may shoot straight up or flood one small area. This often happens from lawn mowers, vehicles, or normal wear.

Heads Not Popping Up Past Grass

Some sprinkler heads stay buried or only partially rise. Water gets blocked by grass and doesn’t spray properly. This leads to dry patches around those heads.

Uneven Coverage (Dry Spots)

Certain areas of the lawn stay dry while others get enough water. You may notice patchy grass or discoloration. This is usually due to misaligned or clogged heads.

Clogged Nozzle

The spray pattern looks uneven or distorted. Dirt or debris blocks part of the water flow. This reduces coverage and can create dry spots.

Valve Not Turning On

One zone doesn’t run at all when scheduled. Other zones may work fine, but this one stays completely off. This can be caused by wiring issues or a faulty valve.

Controller Not Working Properly

The system runs at the wrong times or not at all. Settings may reset or not respond to changes. This can lead to overwatering or missed watering cycles.

Overspray onto Sidewalks or Driveways

Water sprays onto concrete or areas that don’t need watering. This wastes water and can create slippery surfaces. It’s often due to misaligned or incorrect sprinkler heads.

Backflow Testing & City Requirements

Wichita

Backflow Testing

  • Required: Every year
  • Submitted through city backflow portal
  • Typically due: Spring–early summer (recommended before June)

Watering Restrictions

  • 3 days per week (odd/even address)
  • Odd: Wed, Fri, Sun
  • Even: Tue, Thu, Sat
  • ❌ No watering Monday
  • ❌ No watering 10 AM – 6 PM

Notes

Well water is exempt

Variances allowed for new sod/seed

Bel Aire

Backflow Testing

  • Required: Every even-numbered year
  • Deadline: June 1 (testing year only)
  • Must be submitted to city

Watering Restrictions

  • Same as Wichita (3-day schedule)
  • Odd: Wed, Fri, Sun
  • Even: Tue, Thu, Sat
  • ❌ No watering Monday
  • ❌ No watering 10 AM – 6 PM

Notes

Variances available for new turf

Fines increase after repeat violations

Derby

Backflow Testing

  • Residential: Every 2 years
  • Commercial: Every year
  • Must be submitted to city

Watering Restrictions

  • Fixed schedule (NOT odd/even)
  • Water only: Tue, Thu, Sat
  • ❌ No watering 10 AM – 6 PM

Notes

Rain sensors required on systems

Follows Wichita conservation rules loosely

Haysville

Backflow Testing

  • Required: Yes (typically annual)
  • Must be submitted digitally (no paper forms)
  • Fee required with submission

Watering Restrictions

  • Not always identical to Wichita
  • May vary depending on water supply conditions

Notes

Important to submit correctly or you’ll get flagged

Uses online system (Vepo Cross Connex)

Goddard

Backflow Testing

  • Required: Annually (typical for Wichita-area cities)
  • Must be tested by a certified tester
  • Results usually submitted to the city

Watering Restrictions

  • Often follows Wichita-style restrictions (odd/even schedule)
  • May change during drought conditions

Notes

City enforces cross-connection protection rules

Backflow devices are required on all irrigation systems

Maize

Backflow Testing

  • Required: Every year
  • Must be tested by a certified tester
  • Records must be kept and submitted to the city

Watering Restrictions

  • Generally aligns with Wichita conservation rules
  • Subject to drought-stage restrictions

Notes

Failed devices must be repaired or replaced immediately

Must maintain records of all tests and repairs

Valley Center

Backflow Testing

  • Required: Annually (typical in the region)
  • Submitted to the city or water provider

Watering Restrictions

  • Normally similar to Wichita
  • Can become much stricter during drought
    • Example: limited to once per week watering during restrictions

Notes

Penalties increase with repeated violations

Restrictions can change quickly based on water supply

Cheney

Backflow Testing

  • Required: Typically annual (regional standard)
  • Must be performed by a certified tester

Watering Restrictions

  • Often tied to Cheney Reservoir conditions
  • Can follow Wichita or implement stricter drought rules

Notes

Expect tighter limits during dry years

Water supply levels directly impact restrictions

Scroll to Top