Frequently Asked questions
How much is a sprinkler system install near Wichita KS?
Our Irrigation systems come with a 3 year warranty plan as long as we Activate and Winterize the system every year. This is two more years the guarantee than most of our competitors. Our starting price for a new install is $3,500, which covers a 3 Zone City System. Maintenance cost for an already installed city sprinkler system depends on the zones. For most sprinkler systems under 10 zones, maintenance usually cost around around $330. This would include an activation, a few sprinkler heads repaired and winterizing the sprinkler system since we are in Kansas.
How many minutes should each sprinkler zone water?
There are three different options depending on your Sprinkler heads. Drip irrigation takes the longest to water and can range anywhere from 20-40 minutes depending on your plants being watered. Rotors cover the largest area and normally then can range from 15-30 minutes depending on the area being covered with 15 minutes for small yards and 30 minutes for fields. Lastly spray heads cover small areas but produce a lot of water so we recommend 6-12 minutes for those zones. your soil type also affects how long you should run each zone. Clay soil cannot absorb water as fast as sandy soil. If you notice there is a lot of runoff water during a zone running then you have reached the limit your ground absorbs water and should probably limit the times shorter. There is a feature on smart controllers called cycle and soak that fixes that very issue.
How many days a week should I water my grass?
Watering your lawn deeper and less often is one of the best ways to promote a healthier sprinkler-irrigated lawn. Instead of watering every day, most grass benefits more from longer watering sessions about 3–4 times per week. This encourages deeper root growth, helping your lawn become stronger and more drought-resistant.
Frequent shallow watering can train grass roots to stay near the surface, making your lawn depend on constant irrigation and causing it to brown quickly if your sprinkler system has an issue. Deep watering allows moisture to soak further into the soil, helping your grass stay greener longer and improving overall lawn health.
Don’t wait around weeks to activate your sprinkler!
Get activated in less than one week!
How often should i water grass seed?
New grass seed should be kept consistently moist so the seed can properly germinate and develop healthy roots. As lawn sprinkler system professional we recommend watering at least three times per day until the first mow, when the entire lawn reaches over 3.5 inches tall. A common sprinkler watering schedule is around 8 AM, 12 PM, and 4 PM to help prevent the soil from drying out during the day. The goal is to lightly water the lawn often enough to keep the top layer of soil damp without causing runoff or puddling around the sprinkler head areas. Once the grass is established, the sprinkler system can transition to deeper and less frequent watering cycles. Proper lawn sprinkler watering during seeding is one of the most important parts of preventing future lawn repair issues caused by weak root systems. Allowing grass seed to dry out too often can slow germination and create uneven lawn growth that may later require additional repair work.
What Time Should I Water My Grass?
Morning watering is highly recommended for any lawn sprinkler or sprinkler system schedules because it provides the best conditions for healthy grass growth. Having your sprinkler system finish around sunrise or within an hour after sunrise helps the lawn absorb moisture before the heat of the day increases evaporation. Early morning watering also reduces wind interference, allowing each sprinkler head to distribute water more evenly across the lawn and on the lawn. Running a lawn sprinkler during the hottest part of the day can waste water through evaporation and may increase stress on the grass during summer heat. Watering at night is generally not recommended because grass that stays wet overnight can develop fungus, disease, and other lawn repair problems. Morning irrigation also helps reduce unnecessary water spraying onto sidewalks, vehicles, and people during busy daytime hours. Proper sprinkler system timing improves lawn health, reduces water waste, and can help prevent avoidable lawn repair caused by overwatering or poor scheduling.
What Does a Rain Sensor Do?
A rain sensor automatically shuts off your sprinkler system when enough rainfall has been detected. This prevents the lawn sprinkler system from watering while the grass and soil are already wet from rain. Many sprinkler system installations include rain sensors because some cities and local irrigation regulations require them. Rain sensors help reduce water waste, lower utility bills, and improve overall sprinkler system efficiency. Once the sensor dries out, the sprinkler system automatically resumes watering based on the settings programmed into the irrigation controller. Different rain sensor settings allow homeowners to control how much rainfall is needed before the lawn sprinkler pauses operation. Installing a rain sensor is a simple upgrade that can help reduce unnecessary water use and protect the lawn from overwatering damage. Usually a rain sensor pays for itself in water savings through out the sprinkler system lifetime.
Don’t wait until a small issue turns into a costly repair—call now to get on the schedule.
When Should I Turn On or Activate My Sprinklers?
A sprinkler system should usually be activated once temperatures are no longer expected to stay below 40°F for extended periods. Well water sprinkler systems are generally more forgiving because they are not constantly pressurized, allowing many homeowners to activate them around mid-March to late March. City water sprinkler systems and pressure tank systems stay pressurized all the time, making them more vulnerable to freeze damage and sprinkler repair issues during late cold weather. Because of this, many lawn sprinkler systems connected to city water are safer to activate around late March or April. Freezes have occurred as late as April 16th in Kansas, so waiting longer can help protect your sprinkler head, backflow preventer, and irrigation piping from damage. Turning on a sprinkler system too early can result in cracked pipes, broken sprinkler heads, and expensive sprinkler system repair costs. Waiting for more stable spring temperatures is one of the best ways to protect your irrigation investment and avoid unnecessary repair work.
When Should I Winterize My Sprinkler System?
City water sprinkler systems and pressure tank systems should usually be winterized before temperatures consistently begin dropping below 40°F. For most lawn sprinkler systems, this means scheduling sprinkler system winterization during late October or early November. Until the sprinkler system is shut down, exposed sprinkler pipes and backflow preventers should be protected with blankets, insulated covers, or specialized freeze protection covers. Well water sprinkler systems are slightly more forgiving and can often wait until around mid-November at the latest. Waiting too long increases the risk of freeze damage that can lead to cracked pipes, broken sprinkler heads, valve damage, and expensive sprinkler repair costs. A professional sprinkler blowout ($85) is far less expensive than repairing freeze damage after winter weather hits($200+). Proper sprinkler system winterization helps protect your irrigation system, reduce future repair needs, and extend the life of your lawn sprinkler components.
What Is Cycle and Soak?
Cycle and soak is a sprinkler system watering method designed to help soil absorb water more effectively. Instead of running the lawn sprinkler system for one long cycle, the sprinkler system breaks watering into shorter cycles with resting periods in between. This gives the soil more time to absorb moisture so water can penetrate deeper instead of running off around the sprinkler head or onto sidewalks and driveways. Clay soil and compacted ground benefit the most from cycle and soak settings because they absorb water slowly compared to sandy soil. Sandy soil usually drains quickly enough that a standard sprinkler system cycle works without needing extra soak periods. Using cycle and soak settings can reduce runoff, improve sprinkler system efficiency, and help prevent unnecessary lawn repair caused by oversaturation or erosion. This method also encourages deeper root growth, creating a healthier lawn that depends less on constant watering.